Covering

There are four types of covering. For each configuration, one of them is installed in the slot konstruktion-slot-eindeckung. If you want your customers to have a choice, set all desired models and control their visibility via Regeln.

Glass and Polycarbonate

Basic

Model Type: veranda-glas-eindeckung Material Slots: profil, glas, poly, sparren, leisten, wandanschluss, konstruktion

Transparent or translucent roof surface that allows daylight to pass through. Rafters, battens, and edging can be configured separately.

Material

Setting	Prop	Description	Values
Material	eindeckungTyp	Roof surface filling material	0 = Glass · 1 = Polycarbonate
Thickness	eindeckungDicke	Thickness of the panel	Meters
Transparency	opacity	Transparency	0 = opaque · 1 = completely clear
Roughness	roughness	Surface texture	0 = mirror-smooth · 1 = matte
Metalness	metalness	Metallic effect	0 = no effect · 1 = fully metallic
EnvMap Intensity	envMapIntensity	Strength of ambient reflections	Number (default 1.0)
Poly Chamber Size	kammergroesse	Polycarbonate only: Distance between inner chamber ribs	Meters

Rafters

Setting	Prop	Description	Values
Number of Rafters	sparrenAnzahl	Number of rafters	Integer
Rafter Width	sparrenBreite	Width of a rafter	Meters
Rafter Height	sparrenHoehe	Height/thickness of a rafter	Meters
Support Type	sparrenAuflage	Support type for the rafters	0 = Cantilevered · 1 = Inset
Exterior Rafters	sparrenAussen	Additional edge rafters on the sides	0 = No · 1 = Yes
Outer Rafter Width	sparrenAussenBreite	Width of the edge rafters	Meters
Outer Rafter Height	sparrenAussenHoehe	Height of the edge rafters	Meters

Strips and Trim

Setting	Prop	Description	Values
Trim width	leistenBreite	Width of the cover strips between rafters	Meters
Trim Height	leistenHoehe	Height of the cover strips	Meters
Trim Rounding	leistenRundung	Rounding of the trim	0 = sharp-edged · 10 = heavily rounded
Connection	extension	Type of connection to the house wall	0 = no connection · 1 = wall connection (flat sheet metal) · 2 = angle profile (L-profile)
Connection height	wandanschlussHoehe	Height of the connection profile	meters
Connection depth	wandanschlussTiefe	Depth of the connection profile against the wall	meters
End plate	stirnblech	End plate at the front edge (covers rafter heads)	0 = No · 1 = Yes
End Flange Height	stirnblechHoehe	Height of the end flange	Meters
End Flange Depth	stirnblechTiefe	Depth of the end flange	Meters
Front trim strip	vornAbschlussleiste	Additional strip on the front edge of the roof	0 = No · 1 = Yes
Cross Beams	querbalken	Additional cross beams beneath the roofing	0 = No · 1 = Yes
Cross-beam Height	querbalkenHoehe	Height of the cross-beams	Meters
Cross-beam Width	querbalkenBreite	Width of the cross-beams	Meters
Separate Component Materials	einzelMaterialien	Enables separate Material-Slots for rafters, battens, and connections — allows for multicolored designs	0 = No · 1 = Yes

Metal

Enterprise

Model Type: veranda-metall-eindeckung Material Slots: profil, eindeckung, eindeckung-profil

Solid metal roof surface, available as a corrugated or trapezoidal profile. No light penetration.

Setting	Prop	Description	Values
Type	eindeckung	Shape of the sheet metal profile	0 = Corrugated (curved corrugated profile) · 1 = Trapezoidal (angular trapezoidal profile)
Thickness	eindeckungDicke	Sheet metal thickness	Meters
Amplitude	amplitude	Height of the corrugations or depth of the trapezoidal ribs	Centimeters
Frequency	frequenz	Distance between corrugations or width of a trapezoidal rib	Centimeters
Rafter Support	sparrenAuflage	Type of rafter support	0 = Rafter resting on the roof deck · 1 = Rafter resting inside the roof deck
Number of cross beams	balkenAnzahl	Number of cross beams under the sheet metal roofing	Integer
Cross beam width	balkenBreite	Width (depth) of a cross beam	Meters
Cross-beam height	balkenHoehe	Height/thickness of a cross-beam	Meters
Outer beams	aussenBalken	Additional beams on both outer sides	0 = No · 1 = Yes
Exterior Beam Width	aussenBalkenBreite	Width of an exterior beam	Meters
Exterior Beam Height	aussenBalkenHoehe	Height of an exterior beam	Meters
Exterior Rafters	sparrenAussen	Edge rafters on the sides	0 = No · 1 = Yes
Exterior Rafter Width	laengsbalkenBreite	Width of the longitudinal rafters	Meters
Exterior Rafter Height	laengsbalkenHoehe	Height of the longitudinal rafters	Meters
Wall connection	wandanschluss	Connection plate to the house wall	0 = No · 1 = Yes
Connection height	wandanschlussHoehe	Height of the connection profile	Meters
Connection Depth	wandanschlussTiefe	Depth of the connection profile	Meters
End Flange	stirnblech	End flange at the front edge	0 = No · 1 = Yes
End Plate Height	stirnblechHoehe	Height of the end plate	Meters
End Plate Depth	stirnblechTiefe	Depth of the end plate	Meters
Side panels	seitenabschluss	Side panels	0 = No · 1 = Yes
Side Height	seitenabschlussHoehe	Height of the side panel	Meters
Side Depth	seitenabschlussTiefe	Depth of the side panel	Meters

Solar

Enterprise

Model Type: veranda-solar-eindeckung

Roof surface made of solar panels—providing both weather protection and energy generation. Module grid and rafters are freely configurable.

Module Grid

Setting	Prop	Description	Values
Total Width	totalBreite	Width of the entire solar panel area. 0 = Use porch width	Meters
Total Depth	totalTiefe	Depth of the solar panel area. 0 = Use porch depth	Meters
Module Width	modulBreite	Width of a single module. 0 = Calculated from rafter spacing	Meters
Module Depth	modulTiefe	Depth of a single module. 0 = rafter-based	Meters
Number of Modules Side-by-Side	modulAnzahlBreite	How many modules side-by-side. 0 = as many as possible	Integer
Max. Cell Width	maxZellenBreite	Maximum width of a solar cell in the module. 0 = 0.15 m	Meters
Max. Cell Depth	maxZellenTiefe	Maximum depth of a solar cell. 0 = 0.15 m	Meters

Rafters

Setting	Prop	Description	Values
Support	sparrenAuflage	Position of the rafters	0 = Overhanging · 1 = Inset · 2 = On-roof (rafters lie above the module surface)
Number of rafters	sparrenAnzahl	Number of rafters. 0 = Take from porch	Integer
Rafter Width	sparrenBreite	Width of a rafter. 0 = Copy from porch	Meters
Rafter Height	sparrenHoehe	Height of a rafter. 0 = Use porch settings	Meters
Exterior rafters	sparrenAussen	Edge rafters on the sides	0 = No · 1 = Yes
Outer Rafter Width	sparrenAussenBreite	Width of the edge rafters. 0 = Same as normal rafters	Meters
Outer Rafter Height	sparrenAussenHoehe	Height of the edge rafters. 0 = same as normal rafters	Meters

Strips and Trim

Setting	Prop	Description	Values
Trim Width	leistenBreite	Width of the frame trims between modules. 0 = no trims	Meters
Trim Height	leistenHoehe	Height of the frame trims	Meters
Trim Rounding	leistenRundung	Rounding of the trim corners	0 = sharp-edged · 10 = heavily rounded
Connection	extension	Type of connection to the building wall	0 = no connection · 1 = wall connection · 2 = angle profile
Connection Height	wandanschlussHoehe	Height of the connection profile	Meters
Connection Depth	wandanschlussTiefe	Depth of the connection profile	Meters
End plate	stirnblech	End plate at the front edge	0 = No · 1 = Yes
End Plate Height	stirnblechHoehe	Height of the end plate	Meters
End Plate Depth	stirnblechTiefe	Depth of the end plate	Meters
Side trim	seitenabschluss	Side trim of the roof structure	0 = No · 1 = Yes
Side Closure Height	seitenabschlussHoehe	Height of the side closure	Meters
Side Closure Depth	seitenabschlussTiefe	Depth of the side closure	Meters
Separate Connection Materials	einzelMaterialien	Separate Material-Slots for connection profiles	0 = No · 1 = Yes

Slats

Enterprise

Model Type: veranda-lamellen-eindeckung · Material Slots: profil, lamelle

Louvered roof with movable, individually adjustable louvers. The opening angle, retraction depth, and orientation are freely configurable.

Setting	Prop	Description	Values
Orientation	lamellenRichtung	Direction of the slats	0 = Transverse / Bioclimatic (transverse to the line of sight) · 1 = Longitudinal (from front to back)
Width	lamellenBreite	Width of a single slat	Meters
Thickness	lamellenDicke	Thickness of a single slat	Meters
Number	lamellenAnzahl	Number of slats. 0 = automatically calculated from available area	Integer
Angle	lamellenWinkel	How far the slats are open	Degrees (0 = closed · 90 = fully open)
Roughness	lamellenRoughness	Roughness of the slat surface	0 = reflective · 1 = matte
Retraction depth	slatMoveIn	How far the slats have retracted laterally (sliding motion)	0–100 (percent)
Retraction direction	lamellenEinfahrSeite	Toward which side the slats retract	0 = front or left · 1 = rear or right
Mounting	sparrenAuflage	Position of the support structure beneath the slats	0 = Surface-mounted · 1 = Recessed
Connection	extension	Type of connection to the building wall	0 = no connection · 1 = wall connection · 2 = angle profile
Height	wandanschlussHoehe	Height of the connection profile	Meters
Depth	wandanschlussTiefe	Depth of the connection profile	Meters
Frame width	rahmenBreite	Width of the frame profile surrounding the slat panel	Meters
Frame height	rahmenHoehe	Height of the frame profile surrounding the slat panel	Meters
Max. slat length	maxLamellenLaenge	The slat panel is divided starting at this length. 0 = no limit	Meters