Wall Elements

Pro

The plugin recognizes four wall sides: right, left, front, and back. Each side has its own slot into which exactly one wall model is placed.

Side	Slot ID
Right	konstruktion-slot-wand-rechts
Left	konstruktion-slot-wand-links
Front	konstruktion-slot-wand-vorne
Back	konstruktion-slot-wand-hinten

tip

If a wall slot remains empty, that side remains open. If your customer clicks on an empty wall side, the camera will still jump to the corresponding view—even without a wall model.

All wall types require at least one

Pro

license and share these basic props:

Setting	Prop	Description	Values
Width (0=auto from porch)	breite	Manual width of the wall segment. 0 = automatic based on porch width	Meters
Height (0=auto from porch)	hoehe	Manual height of the wall segment. 0 = automatic based on porch height	meters
Transparency	opacity	Transparency of the entire wall	0 = opaque · 1 = fully transparent

Wedge

Model Type: veranda-wand-keil · Material Slots: profil, glas

Wedge-shaped side wall that follows the roof pitch. Filling options include glass, polycarbonate, or wooden planks. Typical for the left and right side walls of a single-slope roof.

Setting	Prop	Description	Values
Front wedge section (0=point)	keilAbschnitt	Height of the lowest front wall section. 0 = the wall starts as a pointed corner, without a straight section	Meters
Number of intermediate posts	keilTeiler	Number of additional vertical posts within the wedge wall—they divide the infill panel	Integer
Profile depth	dicke	Depth of the wedge wall frame profile	Meters
Filling	fuellungTyp	Filling material of the wall frame	0 = glass · 1 = polycarbonate · 2 = planks
Roughness	roughness	Mattness of the infill	0 = glossy · 1 = matte
Metallicity	metalness	Metallic Effect of the Surface	0–1
EnvMap Intensity	envMapIntensity	Strength of Ambient Reflections	Number
Chamber Size	kammergroesse	For polycarbonate only: Distance between the inner chamber ribs	Meters
Plank Height	plankenHoehe	For plank infill only: Height of a single plank	Meters
Plank Thickness	plankenTiefe	Only for plank infill: Thickness of a single plank	Meters

Frame Wall

Model Type: veranda-wand-rahmenwand · Material Slots: profil, glasOben, glasUnten

Frame wall with an upper and a lower infill section. Both sections can have different materials. Optionally with a center beam as a dividing line.

Setting	Prop	Description	Values
Center Beam	mitMittelbalken	Divides the wall horizontally into an upper and lower section	0 = No · 1 = Yes
Center Beam Height from Floor	mittelbalkenHoehe	Height of the center beam above the floor	Meters
Max. pane width (0=no limit)	maxScheibenBreite	Maximum width of a pane. If exceeded, additional mullions are automatically inserted. 0 = no limit	Meters
Upper panel	fuellungTypOben	Filling material for the upper panel	0 = Glass · 1 = Polycarbonate · 2 = Planks
Upper transparency	opacityOben	Transparency of the upper panel	0 = opaque · 1 = fully transparent
Top roughness	roughnessOben	Mattness of the top panel	0–1
Metalness (top)	metalnessOben	Metallic effect (top)	0–1
EnvMap intensity (top)	envMapIntensityOben	Ambient reflection (top)	Number
Upper chamber size	kammergroesseOben	Upper polycarbonate chamber web spacing	Meters
Lower filling	fuellungTypUnten	Filling material of the lower section	0 = Glass · 1 = polycarbonate · 2 = planks
Transparency (bottom)	opacityUnten	Transparency of the lower panel	0 = opaque · 1 = fully transparent
Roughness (bottom)	roughnessUnten	Mattness of the bottom pane	0–1
Metalness Bottom	metalnessUnten	Metallic Effect Bottom	0–1
EnvMap intensity bottom	envMapIntensityUnten	Ambient reflection bottom	Number
Chamber size bottom	kammergroesseUnten	Polycarbonate chamber web spacing bottom	Meters
Top edge	aufDachneigung	Wall height follows the roof pitch — this prevents a visible triangular gap on the side	0 = straight top edge (default) · 1 = Top edge follows the roof slope
Plank height	plankenHoehe	Only for plank infill: Height of a plank	Meters
Plank Thickness	plankenTiefe	Only for plank infill: Thickness of a plank	Meters

Sliding Door

Model Type: veranda-wand-schiebetuer · Material slots: profil, glas

Glazing as a sliding door system. Glass panels can be opened; handles and frames are freely configurable.

Setting	Prop	Description	Values
Variant	mitRahmen	Visible outer frame of the sliding door	0 = without frame (glass only) · 1 = with frame
Number of Elements	tuertypPanels	Total number of all panels. 0 = automatically calculated from maxPanelBreite	Integer
Max. panel width (0=no limit)	maxPanelBreite	Maximum width of a single glass panel. Determines the number of panels when tuertypPanels = 0	Meters
Fixed elements	festeElemente	Number of panels that do not slide	Integer
Sliding elements	schiebareElemente	Number of panels that should slide — takes precedence over festeElemente. 0 = disabled	Integer
Opening	oeffnung	Degree of opening of the sliding door	0 = fully closed · 1 = fully open
Direction of travel	laufrichtung	Direction of opening movement	0 = Panels slide to the right · 1 = to the left · 2 = Biparting: fixed elements on the outside, panels open toward the center
Track Side	schienenSeite	Position of the guide rail	0 = outside · 1 = inside
Brushes	buersten	Side brush seals on the sliding panels	0 = none · 1 = with brush seal
Handle Type	griffTyp	Door handle design	0 = Round · 1 = Shell · 2 = Steel (long bar handle) · 3 = no handle
Handle Arrangement	griffAnordnung	On which panels handles are mounted	0 = first door · 1 = first and last doors · 2 = all panels
Handle position	griffPosition	Side of the handle on the panel	0 = left · 1 = right
Handle side	griffSeite	From which side the handle can be grasped	0 = inside · 1 = outside · 2 = both sides
Handle Height	griffHoehe	Height of the handle above the floor	meters
Filling	fuellungTyp	Material of the glass panels	0 = glass · 1 = polycarbonate · 2 = planks
Roughness	roughness	Mattness of the infill	0–1
Metallicity	metalness	Metallic effect	0–1
EnvMap intensity	envMapIntensity	Reflection intensity	Number
Chamber Size	kammergroesse	Chamber Spacer Spacing for Polycarbonate	Meters
Upper Edge	aufDachneigung	Upper Edge Follows Roof Pitch	0 = Straight Upper Edge · 1 = sloped top edge
Glass Thickness	glasDicke	Thickness of the glass pane	Meters
Frame Width	rahmenBreite	Visible width of the frame profiles	Meters
Slat height	plankenHoehe	Only for slat infill: Height of a slat	Meters
Slat thickness	plankenTiefe	Only for slat infill: Thickness of a slat	Meters

Shutters

Model Type: veranda-wand-shutters · Material Slots: profil, glas

Slatted blinds as a wall element. The slats can be adjusted in angle and, optionally, slid sideways.

Setting	Prop	Description	Values
Slat Height	lamellenHoehe	Height of a single slat. Smaller values result in a denser grid	Meters
Sliding	schiebend	Whether the frames can be shifted sideways	0 = fixed · 1 = sliding
Number of Frames	anzahlRahmen	Number of individual slat frames into which the wall is divided	Integer
Sliding Opening	oeffnungSchiebe	How far the frames are shifted sideways	0 = closed · 1 = fully open
Slat Opening	oeffnungLamellen	How far the slats are open	0 = fully closed · 1 = fully open
Frame width	rahmenBreite	Width of the outer frame profile	Meters
Frame depth	rahmenTiefe	Depth of the outer frame profile	Meters

Privacy screen

Model Type: veranda-wand-sichtschutzwand · Material Slot: profil

Solid screen consisting of horizontal slats with a visible frame profile. The plank appearance is the built-in default look for this model—there is no separate model type for planks.

Setting	Prop	Description	Values
Full Height	volleHoehe	Height of the plank cladding	0 = user-defined (value from hoehe) · 1 = full height (Planks fill the entire wall opening up to the roof)
Plank Height	plankenHoehe	Height of a single plank	Meters
Plank Thickness	plankenTiefe	Thickness of a single plank	Meters
Top Cap Beam	querbalken	Additional horizontal beam at the top of the plank wall	0 = No · 1 = Yes
Min. installation height	minAufbauHoehe	Minimum height that must remain clear for a wall element to be installed	Meters

Installation slots

Additional wall elements can be stacked on top of a privacy screen—for example, a glass wall on top of an opaque base. To do this, assign any additional wall model to one of the assembly slots via a rule: veranda-slot-aufbau-rechts, -links, -vorne, or -hinten.

For custom fillings within the frame, there is a filling sub-slot with the ID 35abe01f-0247-4eb2-ae2a-d62104227bd4. Custom plugins can insert their own fillings there— see Eigene Modelle einhängen.